Air Conveyor

The PET air conveyor neck handling system providing the following advantages from the previous system on the air conveyor.

Minimal Joints can be replaced by non skilled personnel less joints giving a smooth bottle flow less material used so replacement costs are minimal as the neck guide is fully clamped, small sections can be replaced

fully Clamped on straights and bends can be retrofitted to most existing air conveyor systems.

Once set up, the guide rail can be replaced without the need to be reset potential power savings

The Neck Guide Assembly consists of :

1-Neck Guide Rail

2-Neck Guide Holder

3- Neck rail clip

4-Nut

The side guides are set to specifically sized gauge which is measured for the running size of the bottle. The gauge centralizes both the neck and side guides so the bottles hang perfectly vertical

.

Air Conveyor

Air conveyor is a conveyor that empty bottles hanged on and moved by air pressure to the next stage of production.

Blowers Introduction Animation

In beverages manufacturing air conveyor transfers empty bottles which produced by blowing machine to the filling machine.

But how bottles pushed from the out-feed of blowing machine to the in-feed of filling machine?
You must install several air blowers on the air conveyor to produce pressured air towards the destination by sufficient pressure and sufficient flow rate to can push many bottles in the same time in one line.

The number of blowers you need to install on air conveyor depends on the length of  air conveyor and the number of curves found in air conveyor.